Hakko Soldering Equipment

Hakko FX-100/FX100 Induction Heat Soldering Station 50w

The FX-100 soldering system brings RF induction heat soldering technology to an even higher performance level. This small, compact station includes microprocessor control that boosts the recovery performance of the soldering iron tip. The Advanced System Design optimizes performance by reducing the loss of power in the system while maintaining the lowest EMI levels to meet applicable standards, especially for work with sensitive devices.
The system is simple to operate — just plug it in and turn it on. No calibration required.

• FX-100 provides the heat to the tip effectively by an induction heater
• More efficient heat supply with an additional feature of power assist
• No calibration is required
• Excellent heat supply to the very point of the smallest tips available
• Ideal for the most challenging soldering jobs
• Temperature range: T31-01 Series: 450°C, T31-02 Series: 400°C, T31-03 series: 350°C
• Tip not included

Hakko FX-838/FX838 Heavy Duty Station 150w

High performance soldering iron for soldering applications requiring rapid thermal recovery, such as heat sinks, power supplies, shield cases and multilayer pcb’s.

• 150w High Powered Iron
• Temperature range 200-500C
• Digital display
• Composite tip with integrated heating element and sensor for superior thermal response
• Auto off & sleep function
• Card control for temperature lock
• Tip not included

Hakko FX-971/FX971 Soldering Station 95w

The FX-971 is the latest bench top soldering station from Hakko. Minimizing footprint to give you more bench top workspace, this 100W station brings the power to both a standard and micro handpiece. Able to provide a 15-degree angle tilt, wider temperature setting, a new holder for tip removal and storage, and works with the new Hakko Control Software. All this and more backed by the Quality, Reliability, and Power you’ve come to expect from Hakko.

Features
Next generation soldering station – derived from best parts of the FX-951
Compatible with standard and micro handpieces (standard handpiece included)
95W capacity, 50-450°C temperature range
Uses T39 tips – over 60 shapes and sizes (sold separately)
Handpiece sensor detects when the iron is in use or should be put to sleep , eliminating the need for connecting cords
FH-215 holder eliminates the need to use tools or hot pads when changing tips, and includes built in tip stand
New, easy to read display is more than 4 times larger than FX-951
Displays set temperature and sensor temperature simultaneously
5 user programmable presets
USB interface enables station to be setup, controlled, and monitored from a PC using the included HAKKO Control Software

Hakko FT-802/FT802 Thermal Wire Stripper

The Hakko FT-802 is a thermal wire stripper that allows you to strip cables with extra precision. Due to the heating, there will be no cuts or nicks in the cable. The temperature of the blades can reach up to 800℃. In addition, the temperature can be set in steps of 5% of the total output, using the arrows. Also, the strip length can be set between 1 to 35 mm, so that you always have the desired result for your material.
The FT-802 has a number of useful functions, such as an auto-sleep function and an indication when the knives have reached the correct temperature. Please note that no blades are included!
A thermal wire stripper ensures clean-cut removal of wire insulation.
High stripping performance ensures clean cut through highly heat-resistant PTFE

• Straight & noched blades available (not included)
• Hakko FT801 Brochure

Hakko FA-400/FA400 Smoke Absorber

Breathe easy with the Hakko FA-400 bench top smoke absorber. The FA-400 removes soldering smoke and fumes quickly, safely and efficiently. The unit can be used in a vertical (standing up) position or low-profile position (laying down.) When used in the low-profile (laying down) position, efficiency and air flow is increased by approximately 2.6 times.

• High performance fan
• 2 positions for smoke absorbing, Vertical or Horizontal
• Air Volume: Vertically 60m3/hour, Horizontally 24m3/hour
• Dimensions: 166(w) x212(h) x 113(d)mm

Hakko FX-300/FX300 Solder Pot

The FX300 Solder Pot features analog functionality and a rugged ceramic heating element. This soldering pot is lead-free compatible and can accommodate two pot sizes.

• Suitable for lead free solder
• Solder pot 50 x 50mm
• Bath capacity approx 850gm
• Temperature range 200-450deg C
• 75 x 75mm bath also available

Hakko FX-301B/FX301B Solder Pot

The FX301B Digital Solder Pot is the perfect solution for dip soldering and tinning the ends of wire leads. Features four different heating programs and convenient timer, which is especially useful where reliable control of solder temperature is essential.

• Suitable for lead free solder
• Solder pot 50 x 50mm
• Bath capacity 850gm
• Temperature range 200-450deg C
• Digital Display
• 75 x 75mm bath also available

Hakko FR-701/FR701 Rework Station

Dual function rework station with FR-4101, 140W high power desoldering gun, and FX-8801 soldering iron, 2-in-1 unit for space saving

• Powerful 140W Desolder Gun - A wide selection of nozzles, with the addition of new types, is available for a variety of desoldering work
• 65W Soldering Iron
• Soldering Iron temperature range 200 - 480°C
• Desolder Gun temperature range 330 - 450°C
• Desolder suction flow 15L/min
• Includes 1x tip/nozzle for each handpiece

Hakko FM-206/FM206 3 Port Rework Station

A compact station capable of performing any task whether Leaded or Lead-free solder, through hole or SMD. Supplied standard are 3 tools, soldering iron (FM-2027), desoldering gun (FM-2024) and micro hot air handpiece (FM-2029). With this station, SMD components can be removed with the micro hot air handpiece and replaced with the soldering iron. Flexibility of this station allows you to control extra optional tools such as the heavy duty iron FM-2030 and hot tweezers FM-2023 (small) or FM-2022 (large). Along with simple controls, large LCD display and safety functions are all encompassed in the new FM206.

• LCD display interface for easy setup with simple dial adjustment control
• 3 simultaneous controlled ports
• Self-contained pump for vacuum and air flow
• Auto shutoff and sleep function
• Passcode and security lock function
• Soldering Iron temperature range 200 - 450°C
• Desolder Gun temperature range 350 - 450°C
• Micro hot air temperature range 100 - 550°C
• Includes 1x tip for each handpiece

Hakko FR702/FR-702 4 Port Powerful Rework Station

4 Port Rework Station with 140W desoldering gun, M-type soldering iron and powerful hot air.

• Powerful 140W Desolder Gun - A wide selection of nozzles, with the addition of new types, is available for a variety of desoldering work.
• 2x 65W Soldering Irons 
• 670W Hot Air Rework with vacuum pickup 
• All handpieces individually controlled
• Soldering Iron temperature range 200 - 480°C
• Desolder Gun temperature range 330 - 450°C
• Desolder suction flow 15L/min
• Hot air temperature range 50 - 600°C
• Airflow 5-115L/min
• Includes 1x tip/nozzle for each handpiece

Hakko FM-204/FM204 Desolder Station 70w

The FM-204 bench top desolder station has a built-in internal vacuum pump and as standard a changeable handle to either pencil or gun grip for through-hole component removal. The FM-204 is supplied with station, desoldering handle tool, iron holder and 599B tip cleaner along with nozzle remover tool, ceramic filters, filter pipe assembly and cleaning drill.

• Temperature range 350 - 450°C
• Suction flow 15L/min
• Sleep function
• Auto shut-off
• Includes 1.0mm tip, filters and stand

Hakko FR-410/FR410 Desoldering Station 140w

As the design of PCBs evolve, the need for higher power desoldering tools with a wide arrange of nozzle configurations grows. The HAKKO FR-410 desoldering station is designed to fit that need and bridge the gap in power between the 70W HAKKO FM-204 desoldering station and the 300W HAKKO FR-400 ultra heavy duty desoldering station.
The HAKKO FR-410 provides 140 watts of power and has the widest selection of nozzle configurations that can meet almost every need. The station includes the same popular features from the HAKKO FR-400, which include an anti-clogging feature that helps ensure instantaneous application of peak vacuum pressure to the solder joint.

Features:

• Heavy-duty Desoldering Tool with built-in vacuum pump.
• Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power
• Secure desoldering with valve function.
• Solder clogging reduced with Anti Clogging Function
• 300w element, suction flow 15L/min
• 0.8mnm to 3mm nozzles available
• Temperature range 350°C ~ 500°C

Hakko FR-400/FR400 Desoldering Station 300w

The Hakko FR-400 Ultra Heavy Duty desoldering station is specifically designed for the difficult rework of extremely large mass components, such as high current inductor coils, heat sinks, large transformers, shields, and other connections where there is a significant amount of thermal inertia that must be overcome.

Features:

• Heavy-duty Desoldering Tool with built-in vacuum pump.
• Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power
• Secure desoldering with valve function.
• Solder clogging reduced with Anti Clogging Function
• 300w element, suction flow 15L/min
• 0.8mnm to 3mm nozzles available
• Temperature range 350°C ~ 500°C

Hakko FR-810B/FR810B Hot Air Rework Station 1000w

The HAKKO FR-810B Hot Air Rework Station sets a new bar for convective rework. The new, compact and lightweight design (only 3.3 lb.) features a quiet, self-contained turbine air supply, capable of delivering up to 115 L/min.. The new heating element design improves durability, provides a top end temperature of 600°C and eliminates the quartz glass insulator tube. The FR-810B includes an integrated vacuum pickup system that includes a visual indicator for reflow, allowing the operator to visually see when the component has completely reflowed and is safely lifted from the PCB. This special feature allows the operator to lift the handpiece without fear of damaging the pads or leads. Additionally, new N51 Series quick-change hot air nozzles for SMT components that are specifically designed for use with the new vacuum pickup system are also available. These newly designed nozzles are compatible with the HAKKO FR-810B and FR-810, and the “older” nozzles from the HAKKO FR-810, FR-803B, FR-802 and FR-801 hot air stations are also compatible with the FR-810B.

• Self Contained air supply
• Airflow 100L/min (free flowing)
• Slim handpiece with control buttons for start/stop function
• Automatic safety cool down
• 5 programmable settings for temperature and airflow
• Temperature range 50 ~600°C
• Auto power off
• Includes N51-02 tip

Hakko FR-811/FR811 Hot Air Rework Station 1170w

The FR-811 is a complete SMD rework system, featuring dual thermocouple inputs for part and board monitoring, PC integration via USB port with Hakko software, an additional external USB port for flash drive memory for storage of profiles, onboard storage of up to 50 profiles, manual and auto modes, auto teach mode for profiling and password lockout.

• New graphic interface display and navigation system that simplifies operation
• Dual Thermocouple inputs allow users to monitor part and board temperatures while controlling the ramp rate for a safe, accurate and repeatable process
• Automatic mode gives users the ability to fully program profiles with up to 6 stages
• Onboard storage of up to 50 profiles with an external USB port for flash drive memory for storage of profiles
• A dedicated USB port can also be used to integrate the FR-811 with a PC using the included software
• Integrated vacuum pickup with a visual indicator in the handpiece that indicates when the component has been completely reflowed

Hakko FR-830/FR830 PCB Preheater

FR830 PCB preheater warms boards before removing parts for repair. It also allows easier and less traumatic removal of large components like SMD voltage regulators, TQFP and BGA chips.

• New improved air outlet design from previous FR820 model
• Safe design protects heater element from damage
• Automatic cool-down function
• Temperature range 150 ~300°C
• Air flow 0.15m3/min
• Manual control or by linking cable for the FR803B hot air station