Call 07 543 1073 or 0800 347 045 Email
Antistatic Products
Synergy Electronics stocks a range of antistatic products from a variety of quality manufacturers, including Ucstat and Desco. Products include antistatic bags from Caltex Plastics, mat and bench cleaners, floor cleaners and treatments, tapes and labels from Desco. Wrist and heel straps, service kits and gloves from Ucstat, lab coats and bench matting and accessories. Also Quick Static Eliminators and testers.
See our full range in our webstore
Shop Online
Antistatic Mat Cleaner
10446 Desco Reztore Surface & Mat Cleaner, 1 Quart (946ml) Spray bottle
Spray on and wipe clean to remove dust, grease, grime, fingerprints, and solder flux and other contaminants from ESD mats and other surfaces without degrading the surface’s ability to drain charges. Does not contain Silicone or other substances that will leave an insulative residue on surfaces.New alcohol free formulation.
RoHS Compliant.
Made in USA.
Desco 10441 Statguard Low Residue Floor Stripper - 2.5 Gallon (9.46L)
Desco Statguard Low Residue Floor Stripper is a strong, non-ammoniated, phosphate-free floor stripper. Its clear, mild pH formulation is designed to break up and lift multiple layers of Statguard Floor Finish. Strips floor finish from vinyl, VCT, concrete, rubber, terrazzo, quarry tile, brick, slate and unglazed ceramic.
Desco 10511 Statguard Static Dissipative Floor Finish - 2.5 Gallon (9.46L)
Desco Statguard Static Dissipative Floor Finish is a cross linked polymer used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber). It creates a dissipative coating that meets or exceeds ANSI/ESD S20.20 minimum requirements for use as a primary grounding method and for charge generation of the flooring/footwear system. Desco Statguard Static Dissipative Floor Finish is 3-coat, 18% solids system (Approx 2000 sg/ft/gallon) that reduces dry time and labor needed for initial install and on-going maintenance.
Desco 10557 Statguard Floor Cleaner - 2.5 Gallon (9.46L)
Desco Statguard Floor Cleaner is formulated to clean floors treated with Statguard Dissipative Floor Finish and Statguard Low-VOC Dissipative Floor Finish, as well as other dissipative or conductive floor tiles and polymer type floor finishes. It is formulated with dissipative agents that will rejuvenate and improve the static dissipative properties of the flooring surface that it is used with without leaving behind residue that can impede dissipation or conductive properties of the flooring material or finish.
MAT600 Antistatic Bench Mat 600mm - Blue or Grey
MAT900 Antistatic Bench Mat 900mm - Blue or Grey
Durable synthetic rubber material, dissipative top layer and conductive bottom layer.
Versatile and long-lasting product. Bottom conductive layer provides reliable path to ground. Excellent value providing long-lasting, consistent electrical properties, will never delaminate, can be taped or glued down. Superior heat, chemical, UV and wear resistance. Meets US ESD ANSI S4.1 and S20.20 guidelines.
100% Premium Nitrile Butadiene Rubber. 900mm wide. 1e6-1e8 point to point and point to ground resistance.
Mat length cut to suit your requirements. Antistatic Bench Mat Datasheet
GC3 Dome Ground Cord
10mm female snap, straight cable with molded low profile mushroom cap. Ring terminal at end of ground cord allows easy attachment to electrical ground.GC2 Dual Jack Ground Cord
10mm female snap molded in 1 megohm resistor. 10ft long number 10 terminal, 2 banana jack receptacles for wrist straps.
GS401 Push & Clinch Male Snap Stud 10mm
Pronged 10mm sockets or 10mm studs. Easily installs onto multi-layer rubber or vinyl. Provides a strong contact for table matting
Clipsal 463SAS Grounding Plug for Antistatic
For grounding to mains earth. Screw terminal to fit ring terminal of ground cord.
WS2A Ucstat Adjustable Antistatic Wrist Strap 6ft
WS3A Ucstat Adjustable Antistatic Wrist Strap 12ft
Conductive polyester elastic band with conductive fiber interior and insulated exterior. Band size 2x22cm. with 1M ohm resistor. Resistivity : 1 x 10^6 ohms
HG3MR Ucstat Antistatic Heel Strap
The conductive ribbon should be placed into shoes, and touch the soles of the feet if possible. The static will be dissipated via conductive ribbon from soles of the feet to anti-static/conductive floor mat. Size can be adjusted by the velcro strap for both comfort and practicality. Conductive rubber with polyester conductive strip and bulit-in 1M ohm resistor. Resistivity : 1 x 10^6 ohms.
BHI-S Ucstat Conductive Brush - Toothbrush type
Clean IC boards and parts. Rare conductive bristles in the market, designed and manufactured by Ucstat. Conductive plastic (handle), conductive nylon (fibers). Resistance 10^3 - 10^5 ohm.
AG1 Ucstat Antistatic Gloves with Palm Grip
Good skidproof effect. Will keep good anti-static properties even when washed many times.Back - Polyester woven with conductive yarn.
Palm - Cotton-point palm with PVC coated dots.
Resistance: 10^7 - 10^9 ohm/sq
Sizes - S, M, L, XL
Carbon Conductive Gloves with Coated Palms
Carbon Conductive Gloves with Coated PalmsResistance: 10^7 - 10^9 ohm/sq
Sizes S, M ,L, XL
Antistatic Lab Coats - Blue or White
Meets Required Limit of ANSI/ESD S20.20-2007 for Static Control Garment< 1 x 10¹¹ ohms Shields ESD susceptible devices from electrostatic charges on worker’s clothing
Fabric: 63% Polyester, 34% Cotton, 3% minimum Conductive Fibers. Comfortable material that can be worn year-round.
Resistant to tears and abrasion
Style: 3/4 Length with Two Side Pockets and One Breast Pocket with ESD Protective Symbol
Sizes: Small, Medium, Large, X-large (larger sizes available on request.)
Antistatic Lab Coats - Black
Medium Weight Fabric, Lapel Collar, Three Snap Adjustable Sleeve, Three pockets.Certified Level 3 ESD Jacket The 9010 Series ESD Jackets have been independently tested and proven to meet the requirements for all three ESD garment categories defined by ANSI/ESD S20.20 including the Groundable Static Control Garment System which is the most stringent of the garment resistance requirements.
Groundable Static Control Garment System: These smocks are designed to act as a primary ground source for the technician (they can act as a replacement for a wrist strap). In addition to grounding the technician, they will also help to shield the technician’s clothing from the ESD sensitive product. The Groundable System is the best ESD smock available.
Fabric: 90% Polyester, 10% Carbon
Durability: Still maintains ESD performance after 100 washes.
129LABEL SCS Antistatic Warning Label 50x50mm
Displays Antistatic warning symbol and message in strict accordance with MIL-STD-129.500 labels per roll.
Antistatic Shielding Bags
Ideal for packaging of PCB’s and IC’s. Extremely durable buried metal construction gives Faraday Cage performance needed to shield against static charges. Contains no amines or amides, is N-Octanoic acid free and is polycarbonate compatible.ASB3X5 Antistatic Shielding Bag 3” x 5”
ASB4X6 Antistatic Shielding Bag 4” x 6”
ASB5X8 Antistatic Shielding Bag 5” x 8”
ASB6X8 Antistatic Shielding Bag 6” x 8”
ASB6X10 Antistatic Shielding Bag 6” x 10”
ASB8X10 Antistatic Shielding Bag 8” x 10”
ASB8X12 Antistatic Shielding Bag 8” x 12”
ASB10X12 Antistatic Shielding Bag 10” x 12”
ASB10X14 Antistatic Shielding Bag 10” x 14”
ASB12X18 Antistatic Shielding Bag 12” x 18”
ASB15X18 Antistatic Shielding Bag 15” x 18”
ASB18X18 Antistatic Shielding Bag 18” x 18”
Ucstat TE-502 Antistatic Wrist Strap / Foot Wear Tester
Dual tester for testing wrist strap, footwear or ESD shoes.
Solid construction and reliable operation, easy to use.
Battery or adapter powered (AC Adaptor Included).
- Testing range : Wrist strap 750K ~ 10M ohm
- Foot wear: 100K ~ 100M ohm
- Indication : High fail / red light, Pass / green light & tone, Low fail / yellow light
Ucstat TE-502-2 Stand & Plate (excludes tester)
Stand, Pillar and Plate can be connected easily to the UC-TE502 for testing footwear and resistance of shoes. Connected with tester and plate via stand pillar.
Desco 19280 Wrist Strap and Footwear Combo Tester
Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms; Footwear limits 750 kilohms to 100 megohms.
Determines that operator’s personal grounding device is functioning correctly.
Separate Test Circuits for Wrist Straps and Foot Grounders.
Powered by 9V Battery or Optional Power Adapter.
Optional Foot Plate or Stand
Combine tester with foot plate or stand to test foot grounders.
Foot Plate Item# 98273.
Stand Item# 98254.
NIST Calibrated with Certificate Included
Desco 19282 Wrist Strap and Footwear Combo Tester with Stand
Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms; Footwear limits 750 kilohms to 100 megohms.
Determines that operator’s personal grounding device is functioning correctly.
Separate Test Circuits for Wrist Straps and Foot Grounders.
Powered by 9V Battery or Optional Power Adapter.
NIST Calibrated with Certificate Included
Desco 19240 Wrist Strap Tester
Tests Path To Ground and Presence of an Inline 1 Megohm Resistor in Wrist Strap.9 Volt Battery Power Supply.
NIST Calibrated with Certificate.
The Wrist Strap Tester will also test a Groundable Static Control Garment System.
Wrist Strap Range: 800 Kilohms - 10 Megohms.
Desco 07010 Wrist Strap and Foot Grounder Calibration Unit
Passive device, No power source required.NIST traceable, Allows in-house NIST traceable calibration.
Wrist strap test range: 750 Kilohm - 100 Megohm.
Foot ground test range: 750 Kilohm - 100 Megohm.
NIST Calibrated
