Goot RX-802AS Digital Lead Free Soldering Station 72w

The Goot RX-802AS is an anti-static easy to use Soldering Station with fast response time. With a new sensor integrated into the heater, the 72W heat capacity allows faster temperature recovery during heavy soldering, reducing the reaction time even at lower temperature settings. Stability during heavy soldering enables low temperature soldering and reduces the risk of thermal shock to sensitive electronic parts.

Superior heat recovery
Built-in high-powered heater (72W) capable of delivering enough power to maintain stable tip temperatures, even under different soldering work conditions. Minimal heat loss means the user doesn't have to set the station at a higher set temperature. Capable of being set at lower temperatures, therefore decreasing tip degeneration when soldering with high melting point lead-free solder.

Thick iron coating
All RX-80HRT tips have a thick iron coating. For example, the thickness of the B-type iron coating is 0.5mm or above, while the thickness of tips in competitor irons are between 0.25mm and 0.3mm. More thickness assures longer tip life.

Superior sleep function (Patented)
Automatic switch off when inactive for a preset period of time. This is easier on the tips than switching the unit OFF. This unit's sleep function can be programmed to activate at preferred inactive time periods, or can be programmed to go into sleep mode at a certain drop in tip temperature, therefore applicable to a variety of work conditions. (Competitor stations have one set mode only.) Further, before sleep mode activates, the sleep lamp flashes, warning the user that the unit is about to enter sleep mode. Bringing the tool out of the Sleep Mode is as easy as wiping the tip on a sponge to clean the tip.

Fastest in it's class
Reaches tip temperature in 6 seconds. (Equivalent products among competitors take an average of 15 seconds.)

Light and compact handpiece
The soldering iron weighs 27 g, the lightest in the 70W station class. The soldering unit cord is designed with a thin and very pliable cable with the diameter 4mm.

Easy-change tip 
One-Step-Slide tip can be changed while the tips remain hot. New tip can be inserted without danger of burns because the tip does not heat until the operator pushes any button on the control unit. Six seconds after pushing any button the unit is ready for full operation.
RX-802AS Replacement tips compared to competitors:
No tools needed for changing the tip, also no heat-resistant pads!
Tips can be stored in the RX-802AS soldering iron stand which comes with the unit. 
The tips are designed NOT to come in contact with the surface when placed on a workbench.

Specifications
Heater 72w
Temperature range 50-450°C
Includes Station, Handpiece and Stand.
Note tip not included.