Desco 10550 Statguard Low-VOC Floor Finish - 2.5 Gal (9.46L)

Statguard® Low-VOC floor finish will protect and maintain ESD permanent flooring such as vinyl composition tiles, sheet vinyl and rubber tiles. Statguard® Low-VOC floor finish provides a resistance range (1 x 106 to < 1 x 1010 ohms) and low charge generation (less than 100 volts) that meets or exceeds ANSI/ESD S20.20 required limits as an ESD protective floor or as a personnel grounding method.

• Static Dissipative Zinc Free Floor Finish - Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
• Dissipative (1 x 106 to < 1 x 1010 ohms) Coating - ANSI/ESD S7.1 and ESD TR53 - Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
• Low Tribocharging (<100 volts) Coating - ANSI/STM 97.2 - Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring
• 23% Solids- 2 Coat System** - Reduces labour needed for initial install and on-going maintenance of the floor
• Better Hardness vs. Leading Competition – ASTM Standard D2134.93 - Resists wear in order to maintain ESD performance longer
• UL Listed for Slip Resistance - Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user’s liability exposure
• Lead-free RoHS Compliant
• Desco 10550 Application Guide