Desco 10511 Statguard Static Dissipative Floor Finish - 2.5 Gallon (9.46L)

Desco Statguard Static Dissipative Floor Finish is a cross linked polymer used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber). It creates a dissipative coating that meets or exceeds ANSI/ESD S20.20 minimum requirements for use as a primary grounding method and for charge generation of the flooring/footwear system. Desco Statguard Static Dissipative Floor Finish is 3-coat, 18% solids system (Approx 2000 sg/ft/gallon) that reduces dry time and labor needed for initial install and on-going maintenance.

• Static Dissipative Cross-Linked Floor Finish - Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
• Dissipative (1 x 106 to < 1 x 1010 ohms) Coating - ANSI/ESD S7.1 and ESD TR53 - Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
• Low Tribocharging (<100 volts) Coating - ANSI/STM 97.2 - Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring.
• 18% Solids- 3 Coat System - Reduces labor needed for initial install and on-going maintenance of the floor
• UL Listed for Slip Resistance - Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user’s liability exposure
• RTT: 10E7 ohms per ANSI/ESD S4.1 @ 50% R.H.
• Coverage: 2,000 sq. ft/gallon (49m2/L)
• pH: 8.9
• Solids: 18%
• Water soluble
• Desco 10511 TDS & MSDS