STANNOL offers a wide range of high quality materials for effective and reliable soldering. Stannol is well-known worldwide for innovative soldering wires, flux and soldering pastes that are manufactured with care and have impressive reliability.
We are currently stocking Tin/Lead, Tin/Lead/Silver, SAC305 & SN100C Lead Free Solderwires. 63/37, SAC305 & SN100C Solder Bar. Alcohol and Water based liquid Fluxes.
STANNOL Crystal 505. The soldering wire Crystal 505 is based on a low-halogen activated "No-Clean" flux. It has been developed for high requirements for conventional soldering and for soldering SMDs in industrial production and for repair and resoldering. It combines high activity and good flow characteristics with electrically safe residues. Available in diameters from 0.5 to 2.0mm. This soldering wire can be used for manual and machine soldering shows its strengths where the wettability is not always optimal and the work has to be done quickly. Crystal Technical Data SheetPB100-1.0 Stannol 60/40 Crystal Solder Wire 1.0mm 100gm
TSC305 (Sn96.5Ag3.0Cu0.5) is a lead-free solder according to ISO 9453:2006 (alloy number 711) which can replace eutectic or almost eutectic tin/lead or tin/lead/silver alloys. It is manufactured from pure metals and has been developed to eliminate the use of tin/lead alloys in all existing
production processes in electronics manufacturing and guarantees a lead-free soldering process.
STANNOL CRYSTALL 511. The wire flux Crystal 511 is a well activated flux based on synthetic resins. it combines high activity and good flow characteristics in an outstanding way with small amounts of solid and electrically safe residues. Currently stocked in diameters from 0.5 to 1.2mm. The Crystal 511 can be used for manual and machine soldering in the area of electrical engineering and electronics.
Crystal Technical Data Sheet. ROHS Statement. REACH Statement.
STANNOL SN100C is a silver-free, eutectic lead-free solder, based on Sn99.3Cu0.7 and conforms analogous to ISO 9453:2006 (alloy number 401) with micro-alloyed additives (<500ppm). The SN100C has been developed and patented by NIHON Superior, licenced and produced by STANNOL. We are stocking SN100C with a Halide free Crystal flux.
Crystal Technical Data Sheet
PBPELLETS Stannol 63/37 Solder Pellets 1kg bag
60/40-STICK Stannol 60/40 Solder Stick 4x440mm (sold per kg, approx 22 sticks/kg)
PBBAR Stannol 63/37 Stratoloy Solder Bar (sold per kg, minimum 25kg box)
ECOLOY TSC305 (Sn96.5Ag3.0Cu0.5) is a lead-free solder according to ISO 9453:2006 (alloy number 711) which can replace eutectic or almost eutectic tin/lead or tin/lead/silver alloys.
The ECOLOY TSC305 alloy is manufactured from pure metals and has been developed to eliminate the use of tin/lead alloys in all existing production processes in electronics manufacturing and guarantees a lead-free soldering process.
SAC305 Ecoloy TDS
4860P-35G MG Chemicals No Clean Solder Paste 63/37 35g
The MG 4860P No Clean Solder Paste is a no clean solder paste designed for surface mount applications using a syringe dispensing method. The post soldering residues of 4860P are non-conductive, noncorrosive and highly insulated. 4860P Technical Data Sheet
4900P-25G MG Chemicals No Clean Solder Paste Lead Free 25g
MG Chemicals has developed a unique flux system designed specifically for high temperature lead free alloys. It provides the fluxing activity levels that promote thermal stability and prevents thermal degradation when reflowing under air atmosphere (normal). Since use of nitrogen is not required, MG 4900P Lead Free Solder paste will provide excellent cost savings. In addition, MG 4900P Lead Free solder paste exhibits superior joint strength, excellent wettability, and extraordinary print definition and tack life. The post soldering residues of MG 4900P are non-conductive, non-corrosive and highly insulated. 4900P Technical Data Sheet
Stannol Mulifix 450-01 was especially developed for rework and repair. It is a resin based, no-clean,tacky flux, suitable for manual and automatic dispensing, with good printability and fine dispensibility. The extreme low activation causes an excellent insulation reaction of the flux residues after soldering. The residues of Multifix 450-01 dry quickly, are hard and not sticky.
Flux Gel Technical Data Sheet
Stannol WF300S is a No-Clean water-based and is suitable for use everywhere organic solvents are used. Due to an increased solid content, it is possible to reduce the volume to be applied so that the water as solvent can also be well evaporated in the preheating of the wave soldering machine.
No-Clean - no cleaning necessary
Very effective on surfaces with poor solderability
Optimised for the reduction of solder beads
Non-combustible formulation VOC content < 1%
Increased solid content for reduction of the application amount
The flux WF300S has been specially developed for use in a wave soldering system with spray fluxer. Can be used with or without nitrogen.
WF300S TDS WF300S MSDS
Stannol X32-10i is a halogen free activated No Clean Flux shows a relatively wide process window.
Halogen-free No-Clean - low residue
Electrically safe residues
Light, transparent residues
The Flux X32-10i is well suited for use in a spray fluxer.
X32-10i TDS X32-10i MSDS