Product News

June 2017

Electrolube Chemicals

MG Chemicals

New Electrolube and MG Chemicals Products

AFC400 Electrolube Antistatic Foam Cleaner
A very efficient anti-static foaming cleanser for surfaces prone to static dust attraction which has been specially developed for use on plastics, metal, glass and synthetic surfaces. Safe on all plastics, Non-flammable 400ml aerosol

IPA400 Electrolube Isopropyl 400ml Aerosol
Efficient general purpose electronic cleaning solvent. Removes contamination from PCBs. Excellent plastics compatibility. Economic in use.

PUC400 Polyurethane Conformal Coating 400ml
A tough, flexible, modified polyurethane conformal coating that is specifically designed for the protection of electronic circuitry. Excellent mechanical and dielectric properties. Excellent abrasion resistance and mechanical strength. Excellent adhesion under all climatic conditions. UV trace to aid inspection. High level of flexibility, even at low temperatures. Excellent resistance to a wide range of chemicals and solvents. Resistant to mould growth.


415-1L MG Chemicals Ferric Chloride Solution 1L
Copper Etchant. Ready to use solution designed for etching printed circuit boards and other metals.

421-500ML MG Chemicals Liquid Tin 500ml
Quickly tinplates copper circuits on PC boards in 5 minutes or less at room temperature. Provides excellent solderability Protects against oxidation. No mixing or dilution required. 3600 square inches per 500ml

8462-85ML MG Chemicals Translucent Silicone Grease 85ml
Excellent electrical insulator - High dielectric strength. Stable over wide temperature range (-50° to 250°C) and conditions - Non-melting. Odorless and non-toxic. Corrosion inhibitor.

May 2017

493 Some AbsorberConductive Gloves852 Hot Air Rework Station

SLD and Aoyue Soldering Equipment

We have added a small range of lower cost Soldering Equipment - Soldering Station, Smoke Absorber and Hot Air Rework Station.

SLD-936ESD SLD General Purpose Soldering Station
Antistatic design, 60w Soldering Station. Uses same tips and spare parts as Hakko 936 Station. Temperature range 200° - 480°C. Ceramic heating element. Antistatic design


493ESD SLD Smoke Absorber
Remove noxious fumes quickly, safely and efficiently. Angle can be adjusted to suit. High absorption replaceable filter made of premium activated carbon. Air Velocity 90-100CFM


852 Aoyue Digital Hot Air Rework Station
Entry Level Hot Air Rework Tool. Microprocessor controlled. Includes airflow meter for precise adjustment of airflow rate. Built-in temperature sensor that ensures constant temperature regardless of airflow variations.

May 2017

Carl Kammerling CK Tools

Carl Kammerling CK Tools

Synergy Electronics is now the exclusive NZ agent for CK Tools. See our webstore for screwdrivers, screwdriver bits, cutters, pliers, wire strippers, knives.

CK T4810 Screwdriver
CK T49113 Screwdriver
CK T4882X Screwdriver

CK T3622B Snipe Nose Pliers
CK T3750 Side Cutters
CK T3889 Long Nose Pliers

April 2017

PSC5-18	Raaco Compartment Box 18 Compartment
945-00	Raaco Storage Cabinet 45 Draw 554-4ESD Treston ESD Storage Cabinet 24 Draw

Raaco & Treston Storage Products

PSC5-9 Raaco Compartment Box 9 Compartment (43x240x195mm)
PSC5-18 Raaco Compartment Box 18 Compartment (43x240x195mm)
PSB4-15 Raaco Compartment Box 15 Compartment (57x338x260mm)
PSB4-32 Raaco Compartment Box 32 Compartment (57x338x260mm)

Made of high impact polypropylene. Sliding locks secure the lid. Lid attached by three unbreakable hinges. Clear lid making contents visible. Made in Denmark.


1260-00 Raaco Storage Cabinet 60 Draw (552x306x150) Draw size 41x55x153mm
1248-01 Raaco Storage Cabinet 48 Draw (552x306x150) Draw size 41x67x153mm
1240-123 Raaco Storage Cabinet 40 Draw (552x306x150) Draw sizes - 36x(41x67x153mm), 3x(64x91x154mm), 1x(18x275x150mm)
1224-02 Raaco Storage Cabinet 24 Draw (552x306x150) Draw size 64x91x154mm
945-00 Raaco Storage Cabinet 45 Draw (417x306x150) Draw size 41x55x153mm
936-01 Raaco Storage Cabinet 36 Draw (417x306x150) Draw size 41x67x153mm
928-123 Raaco Storage Cabinet 28 Draw (417x306x150) Draw sizes - 24x (41x67x153mm), 3x (64x91x154mm), 1x (18x275x150mm)
918-02 Raaco Storage Cabinet 18 Draw (417x306x150) Draw size 64x91x154mm

Full steel body, spot welded and enamel painted (blue colour). Re-enforced corner brackets for extra strength and stability. Stop rim ensures drawers do not fall out. Drawers made from polypropylene. Rubber feet provide scratch protection and a firm standing. Free standing or wall mountable. Made in Denmark.


551-4ESD Treston ESD Storage Cabinet 48 Draw (550x310x180mm) Draw size 40x69x170mm.
V-1-4ESD Dividers for drawers pk-10

554-4ESD Treston ESD Storage Cabinet 24 Draw (550x310x180mm) Draw size 62x92x170mm.
V-4-4ESD Dividers for drawers pk-10
The frame is made of semiconductive polypropylene (PP), the drawers of semiconductive polystyrene (PS) and the shelves of galvanised steel.

April 2017

FE001	Frontier Vision X Safety Glasses - Clear Lens
FE900	Frontier X-Caliber Safety Glasses - Clear Lens
 
FE001	Frontier Vision X Safety Glasses - Clear Lens

Safety Products

FE001 Frontier Vision X Safety Glasses - Clear Lens
FE900 Frontier X-Caliber Safety Glasses - Clear Lens

HFPD210 Frontier Disposable Ear Plugs Uncorded Class 5 - Pack of 10 Pairs
HFPD200 Frontier Disposable Ear Plugs Uncorded Class 5 - Box of 200 Pairs
HFPD110 Frontier Disposable Ear Plugs Corded Class 5 - Pack of 5 Pairs
HFPD100 Frontier Disposable Ear Plugs Corded Class 5 - Box of 100 Pairs


See webstore for stocked range

March 2017

Fluke

Fluke Test & Measurement

We have added a range of Fluke Test & Measurements to our range. Including Multimeters, Clamp Meters, Infrared Thermometers and accessories.
See webstore for stocked range

Fluke 115 Multimeter
Fluke 325 Clamp Meter
Fluke 62MAX

March 2017

Conductive Gloves

Conductive Gloves

Carbon Conductive Gloves with Coated Palms
Resistance: 10^7 - 10^9 ohm/sq
Available in Small, Medium, Large, Extra Large

February 2017

Conductive Rubber Floor Mat

Ucstat Conductive Rubber Floor Mat

Double layer conductive Floor Mat.
Made from natural and synthetic rubber compounds with conductive carbon.
Resistance 10e3 - 10e5 ohm/sq.
1000mm wide. Thickness 2mm.

January 2017

Stannol Sn99.3 Cu0.7 solder wire

Arax solder wire, alusol solder wire

Stannol SN99.3 Cu0.7 Solder Wire

A lower cost lead free sodler wire.
Stannol Sn99.3/Cu0.7 Crystal 511 Lead Free Solderwire
99.3% Tin, 0.7% Copper 2.7% Flux content
No-Clean Crystal 511
Flux Made in Germany

TC511-0.5  Stannol Sn99.3/Cu0.7 Crystal 511 Lead Free Solderwire 0.5mm 500gm
TC511-0.7  Stannol Sn99.3/Cu0.7 Crystal 511 Lead Free Solderwire 0.7mm 500gm
TC511-1.0  Stannol Sn99.3/Cu0.7 Crystal 511 Lead Free Solderwire 1.0mm 500gm
TCHS10-1.5  Stannol Sn99.3/Cu0.7 HS10 Lead Free Solderwire 1.5mm 500gm


Stannol Arax Cored Solder Wire & Multicore Alusol Solder Wire

ARAX soldering wire shows good wetting and flow characteristics on the following metals: brass - bronze - cadmium - nickel - copper - silver - iron - steel - spring steel - lead - tinplate- some stainless steels - zinc and zinc-plated surfaces - galvanised metal surfaces -many resistance wires. Flux residues must be removed after the soldering process.

ALUSOL soldering wire contains a flux specially matched to soft soldering of aluminium. The soft solder joints with the ALU-SOL soldering wire are not as strong as brazed joints; therefore they must be formed so that they are only loaded by shear stress if possible.

TSARAX-1.6  Stannol SN96/AG4 Arax Solderwire 1.6mm 500gm
MC216  Multicore 45D Alusol 1.6mm 100gm

December 2016

solder wave masking discs

PCB Masking Discs

Individually die cut discs for wave or dip soldering. Withstands 5-8 seconds of immersion in molten 255° C solder. Overlapped to speed up application and ease of handling. 7.5 mils thick. Roll-5000.

SW00375  Shercon Solder Wave Masking Discs 3/8” (9.5mm) Roll-5000
SW00500  Shercon Solder Wave Masking Discs 1/2” (12.7mm) Roll-5000

December 2016

Plato 170 Shear Cutters

 

Plato 1755 Shear Cutters

Plato Shear Cutters

170   Plato 170 Shear Cutter (Max 1.0mm wire size)
5” (125mm). Low cost, made in USA

1755   Plato Heavy Duty Shear Cutter (Max 1.6mm wire size)
6” (150mm). Made in USA

December 2016

The Glove Company Mircolite Nitrile Glove

The Glove Company - Nitrile, Chemical and Mechanics Gloves 

Synergy is now distributing The Glove Company range of gloves. These include Low Cost and Standard Nitrile, Chemical Resistant/Hi-Vis Nitrile and Mechanics glove. We also stock Ucstat Antistatic Gloves and Finger Cots. See our webstore for more details.

Low Cost Nitrile Gloves
The Glove Company’s latest manufacturing technology allows you to now buy nitrile gloves at a lower cost than Latex gloves. Allowing the user to protect themselves with the strength of Nitrile without the problems of Latex allergies. These low impact gloves are the perfect solution for users who have to replace their gloves frequently. Microlite gloves are their lightest glove, providing dexterity similar to that of a naked hand.
  • Highly affordable Nitrile for less than Latex.
  • Very Lightweight, their lightest glove.
  • Food safe with FDA approval & HACCP Reg.
  • Extremely fine Dexterity.
  • Latex, Vinyl, MBT and powder free.
  • 100% Nitrile (acrylon nitrile, butadiene)
230031 The Glove Company Microlite Nitrile Gloves - Small - box-100
230032 The Glove Company Microlite Nitrile Gloves - Medium - box-100
230033 The Glove Company Microlite Nitrile Gloves - Large - box-100
230034 The Glove Company Microlite Nitrile Gloves - Extra Large - box-100

The Glove Company iSense Nitrile Glove
Standard Nitrile Gloves
iSense disposable gloves are significatly ahead of traditional latex and vinyl gloves, offering unmatched strength and comfort. The soft nitrile material is gentle on the skin minimising the risk of allergic reation and enabling the user to don the glove easily and smoothly without tearing. The nitrile material has been specifically formulated to deliver enhanced strength and durability.
Complies to AS/NZS 4011.1:2014 EN standard for medical gloves for single use and requirements tested for physical properties in accordance with EN 455 Part 1,2,3,4.
  • 100% Nitrile (acrylon nitrile, butadiene).
  • Conforms to european device directive standards.
  • Medical Safe.
  • Good chemical protection (EN 374)
  • Improved wet grip.
  • Textured fingertips.
  • Meets EN 374/2/3
  • Latex, MBT and powder free.
230001 The Glove Company iSense Nitrile Gloves - Small - box-100
230002 The Glove Company iSense Nitrile Gloves - Medium - box-100
230003 The Glove Company iSense Nitrile Gloves - Large - box-100
230004 The Glove Company iSense Nitrile Gloves - Extra Large - box-100
The Glove Company Chemical Hi-Vis Nitrile Glove
Chemical Resistant/Hi-Vis Nitrile Gloves
The world’s toughest glove has been revised, illuminating a HiVis orange. Be seen, be safe or work in low-light areas and have your hands easily visible.
TGC Orange Nitrile glove also features a superior chemical resistance and unsurpassed comfort for extended wearing times.
Low Sweat Technology - A modified pH matching that-of-a healthy skin’s natural pH levels is a benefit built into the inner surface of the glove.
  • 100% Nitrile (acrylon nitrile, butadiene).
  • Stronger – Thicker – High Puncture Resistance.
  • High visibility - Fluro colour.
  • Superior Chemical Resistance - 140+ ratings on chemicals.
  • Textured fingertips.
  • Latex, MBT and powder free.
160030 The Glove Company Work Gear Orange Nitrile Gloves - Small - box-100
160031 The Glove Company Work Gear Orange Nitrile Gloves - Medium - box-100
160032 The Glove Company Work Gear Orange Nitrile Gloves - Large - box-100
160033 The Glove Company Work Gear Orange Nitrile Gloves - Extra Large - box-100
The Glove Company Komodo Mechanics Glove
Mechanics Gloves
A genuine mechanic’s glove made to impress as an established product in the premium KOMODO® range.
The KOMODO® mechanic’s glove, is precisely just that but we’ve mastered the details - a glove designed to enhance any mechanical experience with the perfect balance of toughness, durability, comfort, feel, dexterity and fingertip sensitivity.
An honest all-day glove that will see you through the gears and won’t slow you down, it’s oil & fuel resistant too!

  • Finely Textured Sandy Grip for a Loyal Grip even on wet or greasy surfaces
  • Moderate heat handling. Luxury cooling fabrics for breathability, overall comfort & ease of hand movement.
  • Double Dipped Nitrile coating, unaffected by oil, fuel, chemicals, even battery acid.
630201 The Glove Company Komodo Mechanics Gloves - Small 1pr
630202 The Glove Company Komodo Mechanics Gloves - Medium 1pr
630203 The Glove Company Komodo Mechanics Gloves - Large 1pr
630204 The Glove Company Komodo Mechanics Gloves - Extra Large 1pr

November 2016

Steinel HL1400S & HL1620S Heat Guns
Steinel HL1920E Heat Gun

Steinel Heat Guns & Glue Guns

Steinel Heat Guns in 1400w, 1600w, 2000w. See our webstore for more details.

HL1400S Steinel 1400w Heat Gun

  • Optimised centre of gravity for fatigue-free working
  • Integrated thermal cut-out to prevent overheating
  • 1400 watts of power, airflow rate adjustable with two settings
  • Temperature settings 300°C & 500°C
  • Brush motor
  • Micanite heating element
  • Weight 550gm


HL1920E Steinel 2000w Heat Gun

  • Optimised centre of gravity for fatigue-free working
  • Integrated thermal cut-out to prevent overheating
  • 2000 watts of power, airflow rate adjustable in three stages
  • Variable temperature settings 80°C - 600°C
  • Brush motor
  • Ceramic heating element
  • Weight 840gm

 

 

HL1620S Steinel 1600w Heat Gun

  • Optimised centre of gravity for fatigue-free working
  • Integrated thermal cut-out to prevent overheating
  • 1600 watts of power, airflow rate adjustable with two settings
  • Temperature settings 300°C & 500°C
  • Brush motor
  • Micanite heating element
  • Weight 670gm


Heat Gun Nozzles

Range of nozzles available including, reduction nozzles, reflector nozzles, window nozzles.

Steinel Heat Gun Nozzles

 

Holdfast 21407 Gecko Hot Melt Glue Gun006761  Steinel Ultra Power Transparent Hot Melt Glue SticksGM3002  Steinel Gluematic 3002 Hot Glue Gun048211  Steinel Black Hot Melt Glue SticksGM5000 Steinel Gluematic 5000 Cordless Glue Gun

Steinel Heat Guns & Glue Guns

Holdfast economic Glue Gun and Steinel Corded and Cordless Glue Guns.

Holdfast 21407 Gecko Hot Melt Glue Gun

Ideal for fabric, wood,leather, most plastics, ceramics and metals

  • Warm-up time 8-10min
  • Melt temperature 193°C
  • Delivery rate 12g/min
  • Output 12W-70W
  • Weight 250g
  • Includes 1x 100mm Glue Stick

GM5000 Steinel Gluematic 5000 Cordless Glue Gun

Boundless glueing. Hot-glue melt applicator Gluematic 5000, for hobby and trade use. Cordless operation, very high delivery rate of approx. 22 g/min, heating-up time of just 3-5 minutes.

  • Warm-up time 3-5min
  • Melt temperature 210-220°C
  • Delivery rate 22g/min
  • Output during idle phase 20W
  • Output during heat-up phase 500W
  • Output in working phase 120W
  • Weight 330g
  • Includes standard 2mm nozzle and 2.8mm power nozzle
  • Includes 5x 11mm glue sticks

 

 

GM3002 Steinel Gluematic 3002 Hot Glue Gun

The one for almost all. Hot-glue melt applicator Gluematic 3002, for hobby and trade use. High delivery rate of 16g/min, small and practical size, heating-up time of just 7 minutes.

  • Warm-up time 7min
  • Melt temperature 206°C
  • Delivery rate 16 g/min
  • Output during idle phase 16W
  • Output during heat-up phase 200W
  • Output in working phase 45W
  • Weight 320g
  • Includes 3x Glue sticks

Glue Sticks

006761 Steinel Ultra Power Transparent Hot Melt Glue Sticks - 11mm x 250mm (10pcs) 11mm Ø ULTRA Power glue sticks, for glueing a variety of materials, particularly strong all-purpose adhesive. 250gm pack.

048211 Steinel Black Hot Melt Glue Sticks - 11mm x 200mm (8pcs) 11mm Ø glue sticks, black, high-quality coloured holt-melt adhesive, for a variety of materials. 200gm pack.

October 2016

Super Lube lubricants

Increased Super Lube Range

Super Lube Multi-Purpose Grease with Syncolon (PTFE). Patented NLGI grade 2 heavy-duty, multipurpose synthetic lubricant. Long lasting. Prevents rust and corrosion while reducing friction.

  • Temperature range from -40ºC to +230 ºC
  • Will not drip, run or evaporate, clean, non-toxic, non-staining
  • Impervious to salt water, safe in potable water
51010    SuperLube Precision Oiler 7ml
21010    SuperLube Grease 14gm Tube
21030    SuperLube Grease 85gm Tube
41160    SuperLube Grease 400gm Tin
31040    Super Lube Aerosol 170gm
31110    Super Lube Aerosol 311gm

October 2016

Desco Reztore Hand Lotion and Reztore Mat Cleaner

Desco Reztore Hand Lotion and Reztore Mat Cleaner

We have added Desco Reztore Hand Lotion and Reztore Mat Cleaner to our range of chemicals.

10435   Desco Reztore Surface & Mat Cleaner, 1 Quart Spray
35660   Desco Reztore ESD Hand Lotion 8oz (236ml)
35661   Desco Reztore ESD Hand Lotion 32oz (946ml) Pump


September 2016

Murata MLCC X & Y Safety Capacitor

Murata MLCC X & Y Safety Capacitor

Visit Murata's Website or download their presentation here.

Murata X2 SMD Capacitor
  • Base Metal Electrode Type
  • Capacitance Range 10nF-56nF (10,000pF - 56,000pF)
  • Size 2220
  • TC Code: X7R
  • UL Approved

 

Murata X1/Y2 SMD Capacitor
  • Compared to lead type capacitors, this capacitor is greatly downsized and low-profiled
  • Ideal for use as Y capacitor or X capacitor for various switching power Supplies
  • Capacitance Range 100pF - 4,700pF)
  • Thickness 1.0-2.0mm
  • TC Code: X7R
  • UL Approved

September 2016

Loctite Threadlockers

Loctite Threadlockers

We are now stocking Loctite Threadlockers. The most commonly used ones in electronics are below, however we can get in any of the range. Just ask us.

222-10   Loctite 222 Low Strength Threadlocker 10ml
222-50   Loctite 222 Low Strength Threadlocker 50ml
243-10   Loctite 243 Medium Strength Threadlocker 10ml
243-50   Loctite 243 Medium Strength Threadlocker 50ml
248         Loctite 248 Medium Strength Stick 19gm
290-10   Loctite 290 Medium Strength Threadlocker 10ml
290-50   Loctite 290 Medium Strength Threadlocker 50ml

August 2016

Hakko FR-810B/FR810B Hot Air Rework Station

Stannol 63/37 Solder Wire

63% Tin, 37% Lead, 2.5% Flux content.
Rosin core flux with high activation
Melting point 183°C
Made in Germany

63HS10-0.5   Stannol 63/37 HS10 Solder Wire 0.5mm 500gm
63HS10-0.8   Stannol 63/37 HS10 Solder Wire 0.8mm 500gm
63HS10-0.8-1KG   Stannol 63/37 HS10 Solder Wire 0.8mm 1kg
63HS10-1.0   Stannol 63/37 HS10 Solder Wire 1.0mm 500gm

August 2016

Hakko FR-810B/FR810B Hot Air Rework Station

Hakko FR-810B/FR810B Hot Air Rework Station

The HAKKO FR-810B Hot Air Rework Station sets a new bar for convective rework. The new, compact and lightweight design (only 3.3 lb.) features a quiet, self-contained turbine air supply, capable of delivering up to 115 L/min.. The new heating element design improves durability, provides a top end temperature of 600°C and eliminates the quartz glass insulator tube. The FR-810B includes an integrated vacuum pickup system that includes a visual indicator for reflow, allowing the operator to visually see when the component has completely reflowed and is safely lifted from the PCB. This special feature allows the operator to lift the handpiece without fear of damaging the pads or leads. Additionally, new N51 Series quick-change hot air nozzles for SMT components that are specifically designed for use with the new vacuum pickup system are also available. These newly designed nozzles are compatible with the HAKKO FR-810B and FR-810, and the “older” nozzles from the HAKKO FR-810, FR-803B, FR-802 and FR-801 hot air stations are also compatible with the FR-810B.
  • Self Contained air supply
  • Airflow 100L/min (free flowing)
  • Slim handpiece with control buttons for start/stop function
  • Automatic safety cool down
  • 5 programmable settings for temperature and airflow
  • Temperature range 50 ~600°C
  • Auto power off
  • Includes N51-02 tip
  • Hakko FR810B Brochure

August 2016

Hakko FR811 Hot Air Rework Station

Hakko FR-811/FR811 Hot Air Rework Station

The FR-811 is a complete SMD rework system, featuring dual thermocouple inputs for part and board monitoring, PC integration via USB port with Hakko software, an additional external USB port for flash drive memory for storage of profiles, onboard storage of up to 50 profiles, manual and auto modes, auto teach mode for profiling and password lockout.
  • New graphic interface display and navigation system that simplifies operation
  • Dual Thermocouple inputs allow users to monitor part and board temperatures while controlling the ramp rate for a safe, accurate and repeatable process
  • Automatic mode gives users the ability to fully program profiles with up to 6 stages
  • Onboard storage of up to 50 profiles with an external USB port for flash drive memory for storage of profiles
  • A dedicated USB port can also be used to integrate the FR-811 with a PC using the included software
  • Integrated vacuum pickup with a visual indicator in the handpiece that indicates when the component has been completely reflowed
  • Hakko FR811 Brochure

August 2016

MG Chemicals No Clean Solder Paste 63/37 35g SyringeMG Chemicals No Clean Solder Paste SAC305 25g Syringe Loctite GC 10 SAC305 T3 Solder Paste 500g Jar

 

Multicore & MG Chemicals Solder Pastes


4860P-35G MG Chemicals No Clean Solder Paste 63/37 35g Syringe
4860P-250G MG Chemicals No Clean Solder Paste 63/37 250g Jar
4900P-25G MG Chemicals No Clean Solder Paste SAC305 25g Syringe

No clean solder paste designed for surface mount applications using a syringe dispensing method. The post soldering residues are non-conductive, non-corrosive and highly insulated.

2026471 Loctite GC 10 SAC305 T3 Solder Paste 500g Jar
Alloy Sn96.5 Ag3.0 Cu0.5, Type 3 Powder 25-45µm, ROL0 Flux Classification. Loctite GC 10 is stable at 26.5 °C for one year and at temperatures of up to 40 °C for one month. Loctite GC 10 also delivers up to 24-hour abandon times, up to 72-hour stencil life and more than 95% on-line paste utilisation. It also provides superior coalescence and wetting on long soak profiles, significantly reducing solder-related defects.


August 2016

Multicore Solderwire 60/40 Crystal 511 1.22mm 500gm

 

Multicore 96SC Crystal Solder Wire 0.38mm 250gm

Multicore Solder Wires


MC112 Multicore Solderwire 60/40 Crystal 511 0.56mm 500gm
MC114 Multicore Solderwire 60/40 Crystal 511 0.71mm 500gm
MC115 Multicore Solderwire 60/40 Crystal 511 0.91mm 500gm
MC116 Multicore Solderwire 60/40 Crystal 511 1.22mm 500gm
MC117 Multicore Solderwire 60/40 Crystal 511 1.63mm 500gm
MC721 Multicore 96SC Crystal Solder Wire 0.38mm 250gm
MC722 Multicore 96SC Crystal Solder Wire 0.56mm 250gm
MC603 Multicore 96SC Crystal Solder Wire 0.71mm 500gm

August 2016

Foam Tipped Cleaning Swabs
Cotton Bud Cleaning Swabs

 

Cleaning Swabs


SWAB-50 Foam Tipped Cleaning Swab 5” - Pk-50

SWAB-100 Cotton Bud Cleaning Swabs 6” - Pk-100


July 2016

Loctite Adhesives

 

Loctite Adhesives


401 Loctite 401 Prism Instant Adhesive 3gm

401-25 Loctite 401 Prism Instant Adhesive 25ml

403-20 Loctite 403 Prism Instant Adhesive 20gm

406-25 Loctite 406 Prism Instant Adhesive 25ml

416-25 Loctite 416 Prism Instant Adhesive 25ml

480-25 Loctite 480 Instant Adhesive 20g - Toughened, black, fast

454 Loctite 454 Instant Adhesive Gel 20gm


June 2016

HG4  Ucstat Antistatic Toe Strap
Antistatic Gloves

Antistatic Toe Straps and Antistatic Gloves


HG4 Ucstat Antistatic Toe Strap

The elastic design makes it fit any size of high heels. Conductive ribbon should be placed into shoes, and touch the skin on the sole of feet.  The static can be dissipated via conductive ribbon from the sole of feet to the antistatic/conductive floor.
Made of conductive rubber, velcro, polyester conductive strip, and bulit-in 1M ohm resistor.

 

AG1-S/M/L Antistatic Gloves

Good skidproof effect.  Will keep good anti-static properties even when washed many times.
Back - Polyester woven with conductive yarn.
Palm - Cotton-point palm with PVC coated dots.
Resistance: 10^7 - 10^9 ohm/sq

June 2016

MAT1200BL Dissipative Antistatic Bench Mat 1200mm Blue

Increased range of Antistatic Matting

We have added 1200mm wide blue and grey bench matting to our range.

MAT1200BL Dissipative Antistatic Bench Mat 1200mm Blue
MAT1200GY Dissipative Antistatic Bench Mat 1200mm Grey
Durable synthetic rubber material, dissipative top layer and conductive bottom layer.
Versatile and long-lasting product. Bottom conductive layer provides reliable path to ground. Excellent value providing long-lasting, consistent electrical properties, will never delaminate, can be taped or glued down. Superior heat, chemical, UV and wear resistance. Meets US ESD ANSI S4.1 and S20.20 guidelines.
100% Premium Nitrile Butadiene Rubber. 900mm wide. 1e6-1e8 point to point and point to ground resistance.
Mat length cut to suit your requirements.

May 2016

Hakko FX-889/FX889 Dual Port Soldering Station

Hakko FX-889/FX889 Dual Port Soldering Station

The HAKKO FX-889 dual port soldering station has two independent ports, offering users two soldering stations with full power output that can be used simultaneously. The station also features up to 5 user programmable presets for each port, digital calibration, password lockout, and low temperature alarm. Two ports offer multiple options for the user. You can use one port for a standard soldering iron (FX-8801) and the other port for a soldering gun with a manual solder feed trigger (FX-8803) which frees up one of your hands, or an SMD hot tweezers (FX-8804) for surface mount work.
  • 65w Iron
  • Temperature range 200-480°C
  • Temperature stability 1°C at idle
  • Digital display
  • Password function to lock temperature
  • Five temperature presets
  • Includes 1x handpiece and T18-B tip
  • Hakko FX889 Brochure

May 2016

HG-D0004  Ucstat Disposable Heel Strap

HG-D0004 Ucstat Disposable Heel Strap

ESD Disposable Heel Grounders are the perfect solution for plant visitors and other temporary personnel who enter static controlled environments with ESD protective flooring. Constructed from a durable non-woven fabric impregnated with carbon, our disposable heel grounders are comfortable to wear, easily identified and use the entire volume of the fabric to provide protection. Meets requirements of ANSI ESD-S20.20. Packaged as 100/pack.

April 2016

Ucstat TE-502-2 Stand & Plate

Ucstat TE-502 Antistatic Wrist Strap / Foot Wear Tester

Dual tester for testing wrist strap, footwear or ESD shoes. Solid construction and reliable operation, easy to use. Battery or adapter powered.

  • Testing range : Wrist strap 750K ~ 10M ohm
  • Foot wear: 100K ~ 100M ohm
  • Indication : High fail / red light, Pass / green light & tone, Low fail / yellow light


Ucstat TE-502-2 Stand & Plate (excludes tester)

Stand, Pillar and Plate can be connected easily to the UC-TE502 for testing footwear and resistance of shoes. Connected with tester and plate via stand pillar.

Ucstat TE-502 Antistatic Wrist Strap / Foot Wear Tester

April 2016

Super Lube Multi-Purpose Grease

Super Lube Multi-Purpose Grease

Super Lube Multi-Purpose Grease with Syncolon (PTFE). Patented NLGI grade 2 heavy-duty, multipurpose synthetic lubricant. Long lasting. Prevents rust and corrosion while reducing friction.

  • Temperature range from -40ºC to +230 ºC
  • Will not drip, run or evaporate, clean, non-toxic, non-staining
  • Impervious to salt water, safe in potable water
See our webstore for the stocked range. Other products available on request.

March 2016

Kyoshin SMD PCB to PCB terminals

Kyoshin SMD PCB to PCB terminals

Kyoshin have released a new range of SMD PCB to PCB terminals, all are rated at 2A, 250V. Kyoshin have not produced English brochures yet but you can see most of the details in the Japanese datasheet. We have the below sample boards available if you would like to see the terminals or we can arrange samples for you. Drawings are also available on request.

March 2016

Zip Lock ESD Shielding Bags

Caltex Plastics CP STAT 100 Zip Lock ESD Shielding Bags

Ideal for packaging of PCB’s and IC’s. Extremely durable buried metal construction gives Faraday Cage performance needed to shield against static charges. Contains no amines or amides, is N-Octanoic acid free and is polycarbonate compatible. Made in USA.

ASB3X5Z CP STAT 100 ESD Bag 3” x 5” Zip Lock
ASB4X6Z CP STAT 100 ESD Bag 4” x 6” Zip Lock
ASB5X8Z CP STAT 100 ESD Bag 5” x 8” Zip Lock
ASB6X10Z CP STAT 100 ESD Bag 6” x 10” Zip Lock

February 2016

Semitec Current Regulator Diode

Semitec Current Regulator Diode

Semitec have a good range of Current Regulator Diodes and have recently added a 22 mA CRD (S-223T) to accommodate high luminance LEDs. This eliminates the need to use two CRDs with high luminance LEDs, the 22 mA CRD (S-223T) alone is all that's needed. Current regulative diodes ("CRDs") are diodes that, as the name implies, keep the value of electrical currents steady even if the voltage changes. For a wide range of voltage values from 1V up to 100V Semitec CRDs can steady a current at a fixed value. With Semitec CRDs voltage changes, load resistance changes and ripple voltage effects don't change the fixed current value. Normally, creating a current stabilizing circuit is complicated and requires complicated parts. With Semitec CRDs you only need one simple part for the same result. For more information see Semitecs Presentation and Datasheet. If you would like any further information or samples let us know.

CRD applications include:
- LED luminance / rated current stabilisation
- LED streetlights, fluorescent lamps, light bulbs, downlights
- Voltage stabilisation circuits that deliver stabilised currents to Zener diodes
- Current stabilisation for close proximity and other sensors
- Battery charge / discharge circuits
- Electrolytic condenser aging equipment
- Current stabilised measurement devices for semiconductors

February 2016

Magnifying Lamps

Magnifying Lamps

AN1040 Daylight Naturalight Table Magnifying Lamp
The Table Magnifying Lamp is a compact all-purpose, lightweight magnifier providing 1.75X magnification (3 diopter). The daylight tube provides high contrast and accurate colour matching, making it easier and less tiring to see detail clearly. The tube is long lasting and low in energy consumption. Small enough so as not to take up much room, but powerful enough to be great when working on projects that need close-up attention to detail. It’s also foldable – so it’s easy for travelling.

AN1020 Daylight Naturalight 5” Equipoise Magnifying Lamp

This magnifying lamp has a slim head design to improve the viewing area. Less material between you and your work means more clarity and efficiency. Fitted with a 22W Full Spectrum daylight tube, this lamp will allow you to see all the details and work in comfort. Slim design for improved viewing area with high quality 13cm (5”) lens for detailed work (1.75X). Supplied with tube, table clamp and lens cover.

A25080 UltraSlim LED Magnifying Equipoise Lamp XR

This professional LED magnifying lamp provides 1.75X magnification with a large crystal clear 17.5cm/7” lens which utilises the XR technology(TM), making it 50% lighter and the special nanotechnology hard coating ensures that it is extra scratch resistant for durability. The 60 ultra-bright daylight(TM) LEDs provide natural daylight for true colour correcting (12W). The FreeMotion(TM) mechanism allows the user to easily and accurately move the lamp to the required position.

February 2016

ESD Shielding Bags

Caltex Plastics CP STAT 100 ESD Shielding Bags

Ideal for packaging of PCB’s and IC’s. Extremely durable buried metal construction gives Faraday Cage performance needed to shield against static charges. Contains no amines or amides, is N-Octanoic acid free and is polycarbonate compatible. Made in USA.

ASB3X5 CP STAT 100 ESD Shielding Bag 3” x 5”
ASB4X6 CP STAT 100 ESD Shielding Bag 4” x 6”
ASB5X8 CP STAT 100 ESD Shielding Bag 5” x 8”
ASB6X8 CP STAT 100 ESD Shielding Bag 6” x 8”
ASB6X10 CP STAT 100 ESD Shielding Bag 6” x 10”
ASB8X10 CP STAT 100 ESD Shielding Bag 8” x 10”
ASB8X12 CP STAT 100 ESD Shielding Bag 8” x 12”
ASB10X12 CP STAT 100 ESD Shielding Bag 10” x 12”
ASB10X14 CP STAT 100 ESD Shielding Bag 10” x 14”
ASB12X18 CP STAT 100 ESD Shielding Bag 12” x 18”
ASB15X18 CP STAT 100 ESD Shielding Bag 15” x 18”
ASB18X18 CP STAT 100 ESD Shielding Bag 18” x 18”

January 2016

MAT900GY Dissipative Antistatic Bench Mat 900mm Grey

New Asahi 2% Silver Solder Wires

SN625000-0.25 Asahi 2% Silver FC-5000 Solder Wire 0.25mm 200gm

SN625000-0.5 Asahi 2% Silver FC-5000 Solder Wire 0.5mm 250gm

Asahi Solders are made in Malaysia. FC-5000 is no-clean Halide free flux. Solder wire is 62% Tin, 36% Lead, 2% Silver.

New Asahi 60/40 Solder Wires

PB5000-0.8 Asahi 60/40 FC-5000 Solder Wire 0.8mm 500gm

Asahi Solders are made in Malaysia. FC-5000 is no-clean Halide free flux. Flux classification ROL0.


November 2015

MAT900GY Dissipative Antistatic Bench Mat 900mm Grey

New Antistatic Products

MAT900GY Dissipative Antistatic Bench Mat 900mm Grey
Same as below blue mat but Grey.

October 2015

MAT900BL Dissipative Antistatic Bench Mat 900mm Blue
GL337	Dual Jack Ground CordGS401   Push & Clinch Male Snap Stud 10mm
Antistatic Lab Coat

New Antistatic Products

MAT900BL Dissipative Antistatic Bench Mat 900mm Blue
Durable synthetic rubber material, dissipative top layer and conductive bottom layer.
Versatile and long-lasting product. Bottom conductive layer provides reliable path to ground. Excellent value providing long-lasting, consistent electrical properties, will never delaminate, can be taped or glued down. Superior heat, chemical, UV and wear resistance. Meets US ESD ANSI S4.1 and S20.20 guidelines.
100% Premium Nitrile Butadiene Rubber. 900mm wide. 1e6-1e8 point to point and point to ground resistance.
Mat length cut to suit your requirements.

GL337 Dual Jack Ground Cord
10mm female snap molded in 1 megohm resistor. 10ft long number 10 terminal,
2 banana jack receptacles for wrist straps.

GS401 Push & Clinch Male Snap Stud 10mm
Pronged 10mm sockets or 10mm studs. Easily installs onto multi-layer rubber or vinyl. Provides a strong contact for table matting

ASCOAT-M/L/XL Antistatic coat
Meets Required Limit of ANSI/ESD S20.20-2007 for Static Control Garment < 1 x 10¹¹ ohms
Shields ESD susceptible devices from electrostatic charges on worker’s clothing.
Fabric: 63% Polyester, 34% Cotton, 3% minimum Conductive Fibers. Comfortable material that can be worn year-round. Resistant to tears and abrasion.
Style: 3/4 Length with Two Side Pockets and One Breast Pocket with ESD Protective Symbol.
Sizes: Medium, Large, X-large

 
Multicore MC802 2% Silver Solder Wire

New Solder Wires

We have added two new solder wires to our range

MC802 Multicore SN62 2% Silver Solder Wire 0.35mm 250gm

MC721 Multicore SAC305 Crystal Solder Wire 0.38mm 250gm

 

 

September 2015

Hakko FX801 High Power Soldering Station 300W

Hakko FR400 Desoldering Station 300w

Hakko FX801 High Power Soldering Station 300W

Tremendous heat performance with powerful composite heater for soldering applications requiring rapid thermal recovery, such as heatsinks, power supply boards, shield cases and multilayer pcb's

Features:
  • Sleep function- for extended tip life.
  • Energy saving automatic power shut-off function.
  • Quick and simple tip replacement
  • Select from 6 preset temperatures
  • Composite tip technology, tip and ceramic element combined
  • Digital display
  • Super power 300 Watts
  • T33 series tips, 9 different profiles
  • Temperature range 50ºC ~ 500ºC

Hakko FR400 Desoldering Station 300w

Excellent heat performance with super suction power, enables desoldering even on high heat capacity and high heat dissipation property PWB. Nozzle for 2mm or larger diameter lead or flat termination are available.

Features:
  • Heavy-duty Desoldering Tool with built-in vacuum pump.
  • Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power
  • Secure desoldering with valve function.
  • Solder clogging reduced with Anti Clogging Function
  • 300w element, suction flow 15L/min
  • 0.8mnm to 3mm nozzles available
  • Temperature range 350°C ~ 500°C

July 2015

Murata Water Repellant Ceramic Capacitors

Murata have developed a new range of ceramic capacitors with a water repellant coating to minimise ion migration resulting from condensation on the PCB. The GXM series is treated with a water-repellant treatment film so that moisture forms into scattered droplets, rather than larger droplets. These droplets are suppressed to a size that is not big enough to span the gap between the external electrodes, this prevents ion migration.

Murata GXM Series

Size range of 1.0x0.5mm - 3.2x2.5mm. Voltage range 2.5Vdc - 100Vdc. Capacitance range 0.10pF - 220µF. You can see the range here Murata GXM Series or download a copy of the full presentation.

Murata have not put together sample kits for this new series yet but if you would like one once they are available let us know and we will send you one or any specific values you require.

 

February 2015

Hakko FR810 Hot Air Rework Station

Hakko FR810 Hot Air Rework Station

The FR-810 makes it possible to supply hot air with high volume airflow and high output when repairing heavy duty boards. And just the right airflow and high output can be set for high density boards with fine components. Together with digital control, this creates the ideal worksite and the workpiece, and improves rework efficiently.
  • Turbine powered digital SMD hot air rework station for a various kinds of boards
  • Maximum Temperature 600℃, maximum airflow 115L/min
  • Simple nozzle removal and easy maintenance
  • Conventional/older series nozzles are usable via a conversion adapter (B5058)
  • Hakko FR810 Brochure
 

November 2014

Hakko FX100 Induction Heat Soldering Station

Hakko FX100 Induction Heat Soldering Station

The HAKKO FX-100 features IH (induction heater) that continuously powers the soldering iron and maintains the set temperature by automatically detecting even minute drops in temperature, plus HAKKO's proprietary Power Assist function. The FX-100 achieves powerful thermal recovery even with fine-shaped tips. It provides excellent thermal responsiveness that conventional IH and sensor
feedback systems cannot offer.
Unlike conventional temperature setting systems, every tip in the lineup is fixed at either 350°C 400°C or 450°C.

Features
  • No calibration necessary
  • User-selectable power display
  • Password lockout
  • Tip sleep function reduces temperature during inactivity
  • User-programmable heating profiles
  • Auto power-off safety feature
  • Slender and lightweight soldering iron with burn-resistant cord
  • Suited to a range of applications from micro-soldering to high-volume soldering
  • Hakko FX100 Brochure
 

September 2014

Fujitsu AA Alkaline Battery

Fujitsu Alkaline, Heavy Duty & Lithium Batteries

Fujitsu are a well known large Japanese company established world wide in the electronics industry. As the majority owner of FDK, one of the worlds largest portable battery manufacturers, the Fujitsu brand is used for the consumer battery products in the range.
We are currently stocking mostly blister packs in Alkaline, Heavy Duty and Lithium. We will add bulk shrink packs as demand dictates.
Visit our webstore to see the full stocked range
 

August 2014

Hakko FR300 Portable Desolder Gun

Hakko FR-300 Portable Desolder Gun

Hakko have released a new portable desolder gun to update their existing 808 model. The new FR-300 is smaller, lighter and cheaper than the previous model.
The FR-300 includes a new pump system that generates superior suction flow, with better balance to reduce vibration during use. A closed-loop sensor feedback system provides improved temperature recovery and control, with a ceramic heating element (80w) and a temperature range of 350°C - 500°C.
 

July 2014

Murata Micro DC-DC Converters LXDC2HL Series LXDC2UR Series

Murata Micro DC-DC Converters

Murata Electronics have a new micro DC-DC converter series that utilises a unique ferrite substrate to embed the power inductor. By combining a number of Murata's proprietary materials and technical capabilities, Murata developed a product line that delivers ultra-compact size and EMI noise suppression.
The LXDC2UR and LXDC3EP series are believed to be the world's smallest DC-DC converters (at 600mA and 1A current ratings, respectively) that also incorporate the I/O capacitors onto the same package.
A key feature of the LXDC line is the embedding of the power inductor within the actual ferrite substrate. By utilising this structure, the IC can be mounted directly above the power inductor coil with almost no pattern length to diminish leakage radiation noise. The I/O connections are routed through this same ferrite substrate to create a function similar to ferrite beads that significantly reduces conductive noise. Board space is greatly decreased when using this product over other discrete surface mount designs.
Product brief here. If you require full datasheets on any of these please let us know.

Series Features:

  • Low EMI noise and small footprint due to inductor-embedded ferrite substrate
  • High efficiency using synchronous rectifier technology and PFM/PWM auto-select function (forced mode available on some models)
  • Input voltage range = 2.3 ~ 5.5V & 14V (55F series)
  • See individual specifications for Output Voltage and Load Current
  • Switching frequency = 2.5, 2.8, 3.0, 3.3, 4.0, or 6MHz
  • Operating temperature range = -40 to +85°C
 

August 2014

SN100C Solder Bar SN100C Solder Wire

SN100C Solder Products

We now have in stock SN100C solder bar and solder wire for your soldering needs. Samples are available for the solder wires.

SN100C is a silver-free, eutectic lead-free solder, based on Sn99.3Cu0.7 and conforms analogous to ISO 9453:2006 (alloy number 401) with micro-alloyed additives (<500ppm). The SN100C has been developed and patented by NIHON Superior, licenced and produced by STANNOL. 

PRODUCT ADVANTAGES

  • Finer grain structure and shinier surface than conventional Sn99.3Cu0.7 alloys
  • Eutectic alloy (defined melting point at 227°C)
  • Reduction of dross formation - saves money
  • Very good wetting characteristics
  • Highly reduced dissolution rate of copper and other metals in comparison with conventional Sn99Cu1 alloys and as a result significantly increased service lives of the solder baths
  • Reduction of defect rate due to much lower tendency to form bridging and icicles
  • Optimum working temperatures from 260-270°C
  • SN100Ce is the copper-free version of the micro-allying solder. This re-fill solder can be used, if the copper content in used solder baths is too high and needs to be reduced to the accepted level of 0.5-0.9%

Stannol SN100C TDS 

We are currently stocking SN100C in 0.5mm, 0.8mm, 1.0mm in no-clean halide free crystal flux.

 

June 2014

Hirose Connector News

Hirose Japan have released a number of new connectors this year, including high power connectors up to 180A, IP68  connectors, board to wire connectors up to 40A, board to board connectors, coaxial connectors, fibre optic connectors and more. We have listed a small sample of these below.
To see the new range download the Hirose 2014 connector range catalogue. If you like what you see and want more information, pricing or samples just let us know.

Hirose DF62 Series
Hirose DF62 Series
  • 2 - 7 & 13 contact positions
  • 3A (max) current rating
  • 2.2mm x 2mm pitch
  • Secure positive lock
  • AWG22 to AWG30 cable size
  • 250V voltage rating
  • 30 mating cycles
Hirose EV1 Series
Hirose EV1 Series
  • High current, 3 position connector capable of up to 180A
  • Space saving design
  • Crimp termination
  • Vibration resistant with multiple contact springs
  • IP68/IPX9K waterproof rating
  • Shielded structure
Hirose HR41 Series
Hirose HR41 Series
  • Contact positions: 3 & 5
  • Current rating: 20A
  • Voltage rating: AC/DC 400V (3 Pos.) AC 600V/DC 400V (5 Pos.)
  • Waterproof rating: IP68
  • Locking mechanism: Bayonet
  • 2000Hr sunshine weather test. 1500Hr salt spray
Hirose DF60 Series
Hirose DF60 Series
  • 1 - 4 contact positions
  • 40A max current rating
  • Secure mating with clear tactile click
  • Highly reliable 5-point contact
  • Applicable cable size AWG8 to AWG12
  • Keying variations
  • 30 mating cycles

June 2014

Alps Sensors

Alps Electric is a leading global manufacturer of high-quality electronic components for mobile devices, home electronics, vehicles and industrial equipment. More widely known for switches and potentiometers they have expanded into the sensor market in the last few years. Below are their latest sensors covering Humidity, Pressure and Current.

Alps HSHCAL Humidity Sensor
Alps HSHCAL Series Capacitive Digital Humidity Sensor
The HSHCAL series employs proprietary sensing film for the sensor, drawing on experience and achievements by Alps in the MEMS sensor market. This ensures excellent linearity over a broad relative humidity range of 0-100% and superior sensing precision.
An original sensor configuration enables temperature compensation within the sensor device, helping to reduce the design workload.
  • Dimensions(W x D x H) - 2.0 x 2.0 x 1.0mm
  • Digital Output
  • Operating humidity range 0 to 100RH
  • Operating temperature range -20 to +85°C
  • Supply voltage 1.71 to 1.89V
  • Accuracy ±1.5% RH (@ 25°C/50% RH)
  • Temperature sensitivity 50LSB/°C
  • Current consumption(1Hz, Vdd=1.8V)
  • Resolution 14bit
Alps HSPPAD Pressure Sensor
Alps HSPPAD Series Digital Pressure Sensor
The HSPPAD Series has a built-in temperature compensation function, optimised based on data accumulated by Alps through compensation simulations. This simultaneously removes the need to incorporate temperature compensation circuitry into the main unit and eliminates the power requirement for temperature compensation, contributing to energy savings.
  • Dimensions(W x D x H) - 2.0 x 2.0 x 1.0mm
  • Digital Output
  • Operating humidity range 0 to 100RH
  • Operating temperature range -20 to +85°C
  • Supply voltage 1.71 to 1.89V
  • Accuracy ±1.5% RH (@ 25°C/50% RH)
  • Current consumption(1Hz, Vdd=1.8V)
  • Resolution 14bit
Alps GCBC Series PCB Mount High Precision Current Sensor
Alps GCBC Series PCB Mount High Precision Current Sensor
The GCBC Series is a current sensor for PCB mounting and is the smallest and lightest in the industry. The use of a proprietary high-sensitivity magnetic sensor element eliminates the need for a core to concentrate magnetic flux, enabling compact dimensions and weight. Proprietary magnetic control plates positioned around the sensor element ensure both high sensitivity and resistance to outside disturbance.
Resistance in the primary conductor is also the industry’s lowest at 60μΩ, a 40% reduction compared to existing current sensors of other companies. This reduces conductor heat generation, helping to lower power loss associated with current measurement.
  • Dimensions(W x D x H) - 13.4 × 15.7 × 7.2mm
  • Weight 3.0gm
  • Supply voltage +5V ± 0.15V
  • Max. continuous current DC ± 50A
  • Current measurement range ~ DC±40A, ±50A, ±100A
  • Operating temperature -40°C to 105°C
  • Storage temperature -40°C to 105°C
  • Offset voltage 2.5V
  • Linearity ±0.5% FS max
  • Response time 1μs
  • Primary conductor resistance 60μΩ

May 2014

Murata Polymer Capacitors

Murata's Polymer Capacitor series ECAS features low ESR, low impedance, and wide capacitance range of 6.8uF to 470uF. The case size is similar to that of Tantalum Capacitors (7.3x4.3mm) and is the same case size across the range which makes Polymer Capacitors a good replacement for Tantalum capacitors, only the height varies so values can easily be changed as the footprint is the same. There is also no DC bias characteristic of the capacitance and since temperature characteristics are also stable, it excels in Ripple absorption, smoothness, and transient response performance. Polymer Capacitors will also not dry out like Aluminium Capacitors.
Murata Polymer Capacitors

Specifications

  • Size 7.3 x 4.3mm
  • Voltage Range 2-16V
  • Capacitance Range 6.8uF to 470uF
  • Operating Temperature -40 to 105degC

Capacitance Range

  • 2V 100uF-470uF
  • 4V 68uF-330uF
  • 6.3V 10uF-330uF
  • 10V 10uF-150uF
  • 12.5V 10uF-100uF
  • 16V 6.8uF-22uF
Murata Polymer Capacitors

CK Tools           Electrolube           Goot          Hakko       Stannol Solder Products       Uctstat